We should understand the processing method of the box of the reducer case when it is processed, because it needs to be selected when processing it. Here we will briefly introduce the processing method selection of the box of the reducer:
1. The reducer chassis cover and the box body are not interchangeable, so each set must be drilled and hinged.
2. the accuracy of the parallelism of the two holes is mainly guaranteed by the accuracy of the equipment. The workpiece is clamped once, the spindle does not move, and the center distance of the two holes is ensured by moving the table.
3. The body of the reducer chassis is thin and easy to deform. Before processing, it should be treated with aging to eliminate the internal stress. When processing, pay attention to the clamping position and clamping force to prevent deformation of the parts.
4. If the reducer can be mass-produced, a special boring machine can be used to ensure the processing precision and improve the production efficiency.
5. The processing of the hole on the partition cover of the box cover and the box body adopts a special drilling die, and the shape is corrected according to the shape, so that the position accuracy requirement of the hole can be ensured.
6. The main processing part of the reducer casing and the cover is the split surface, the bearing hole, the through hole and the screw hole. The bearing hole is bored after the box cover and the box are assembled to ensure the center line of the two bearing holes. The position with the split face, and the parallelism and center distance of the centerline of the two holes.